Product ID:EPOXY CURING AGENT, FE-7003-B
MSDS Date:12/12/1988
FSC:8010
NIIN:00N020836
MSDS Number: BLKPB

Emergency Phone: 612-481-3300

Info Phone: 612-481-3300

Preparer: INDUSTRIAL HYGIENE

Cage: 0HD19

Telephone: 612-481-3300

Cage: 0HD19

POLYAMIDE RESIN

Fraction By Weight: >10%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: STRONG IRRITANT. SKIN: SKIN
CONTACT WILL CAUSE MODERATE IRRITATION. INHAL: INHALATION IS NOT A
ROUTE OF EXPOSURE. (CHRONIC) NO ANTICIPATED CHRONIC EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH IMMEDIATELY W/LARGE AMOUNTS OF WATER FOR AT LEAST
15 MINUTES. CALL MD. SKIN: WASH AFFECTED AREA WITH SOAP AND WATER.
LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. INHAL: REMOVE FROM
EXPOSURE . RESTORE BREATHING IF NECESSARY. KEEP WARM AND QUIET.
CALL MD. INGEST: CALL MD IMMEDIATELY .

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CO2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP WITH ABSORBENT
MATERIAL. RESIDUE MAY BE REMOVED WITH CHLORINATED SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY LOCATION.
Other Precautions:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.

Respiratory Protection:NOT NORMALLY REQUIRED. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
WASTE DISP METH: STATE AND LOCAL REGULATIONS . FOR ADDITIONAL WASTE
DISPOSAL ASSISTANCE CONSULT H B FULLER ENVIRONMENTAL SERVICES
612/481-1588.

HCC:N1
Appearance and Odor:LIQUID.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
MOLECULAR WEIGHT HYDROCARBONS, CO, NITROGEN COMPOUNDS.

Waste Disposal Methods:THIS PROD DOES NOT MEET DEFINITION OF HAZ WASTE
UNDER U.S. EPA HAZ WASTE REGS 40 CFR 261. STATE/LOCAL HAZ WASTE
REGS MAY APPLY IF THEY ARE DIFFERENT FROM FED REGS.
INCINERATE/DISPOSE OF IN APPRVD INDU STRIAL LANDFILL. DISPOSE OF
I/A/W FED, (SEE DATA)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.